The EL-EnviroPad-TC in Action
Witness the EL-EnviroPad-TC in action! Check out the EL-EnviroPad-TC, courtesy of Vine! vine.co/v/bdqeqKtMnFg — DATAQ Instruments (@DATAQ_Inst) March 13, 2013 Click here for more on the EL-EnviroPad-TC.
View ArticleHow To Connect and Calibrate Thermocouples Using DI-8B47 Series Amplifiers
Thanks to the American National Standards Institute (ANSI), thermocouple wire is color coded to indicate thermocouple type and polarity. This takes the guesswork out of connecting thermocouple wires to...
View ArticleThermocouple Measurements Profile Cement Curing Characteristics of Prosthetic...
Introduction It’s obvious that prosthetic implants have changed the lives of countless thousands for the better. Knee, hip, and shoulder replacements are common surgeries today, substituting diseased...
View ArticleHow to Make Safe and Accurate Thermocouple Measurements Using Isolated...
Thermocouples are the most widely used devices for temperature measurements. They are: Rugged; Inexpensive; Simply constructed (welded wires composed of dissimilar metals); Used to measure temperature...
View ArticleSynchronized and Distributed Data Acquisition Using DI-1000 Instruments in...
Background The need for data acquisition in a distributed and synchronized manner is required in a variety of applications. Consider a hot strip mill that creates a long steel coil starting from a slab...
View ArticleThermocouple Assembly
Follow these instructions to connect a thermocouple to your miniature connector: Unscrew and remove the top of the miniature connector. Remove the rubber washer from the miniature connector and slide...
View ArticleThe Ability of the DI-245 to Reject Common Mode Voltage
The ability of the DI-245 to reject common mode voltage is unmatched in the $75 per channel price range. To demonstrate the ability of the DI-245 to reject common mode (error) voltage, we connected...
View ArticleDI-2008 Thermocouple, mV, V, Pulse DAQ Preview
New model DI-2008 volt, milli-volt, thermocuople, and pulse DAQ. DATAQ Instruments is excited to announce the pending availability of our model DI-2008 USB data acquisition (DAQ) instrument, slated for...
View ArticleMaking Parallel Thermocouple Measurements
The question comes up often, “Can I connect a thermocouple to your data acquisition system and a secondary device (i.e. additional monitoring equipment, a controller, etc), at the same time?” The...
View ArticleDI-2008 Firmware Updates
Periodic firmware updates for the DI-2008 voltage and thermocouple data logger will include bug fixes, performances improvements and/or feature additions. Click here to download the latest firmware...
View Article
More Pages to Explore .....